Singular HD balanced speaker cable is a top-category representative of the Audio Engineer’s speaker cables, which was designed without compromise
Singular HD balanced speaker cable
- Extreme ultra-clear, neutral and natural sound
- Full frequency-range extension
- Realistic wide and deep holographic sound-stage
- Natural sound and expansive spatial pure details
- Extensive and powerful dynamics
- Ultra-extremely low noise
HD Balanced Network Technology
Each cable types have different electrical balance properties. Common cables have electrical properties that are better at transmitting frequencies above the audible range than in the audible range. In this case, frequencies outside the audible range can generate noise.
Singular speaker cables have a built-in fine-tuned filter network, separate for the low and mid/high signal paths, which balances the internal electrical properties of the conductors to provide a cleaner path for signals in the audible range.
In addition to suppressing noise created by frequencies outside the audible range, the built-in HD filter network also balances the feedback effect of the current generated by the speakers, so the sound becomes more accurate and real.
Structure
The Singular speaker cable has fully separate Balanced four quad-core structure conductors, 6 AWG / 12mm² full total conductive cross-section, full-separate quad-vortex inner conductors structure, and reduced resistance. In addition to the completely separate quad-vortex structure, the appearance of the Singular speaker cable has the latest 4D braided design, which ensures full symmetrical transverse positioning, thus reducing the inductive and capacitive effects of the structure of the conductors below the measurable value.
The full-separate vortex structure of the Balanced four quad-core conductors and the 4D braid ensure that the magnetic fields generated around the conductors extinguish each other. Each multicore wire is placed in a special polymerized siloxane insulating tube, that has a lower dielectric constant than the commonly used insulations and optimally dampens environmental vibrations.
Pure silver conductors surround a central, high-purity copper core in the form of a special tube braid. Thus, higher frequencies traveling on the surface of the conductor can travel in the silver conductor, and lower frequencies in the solid copper conductor. Thanks to the special conductor structure, no skin effect develops, so the purity and accuracy of the signal passing through the conductor are constant between the endpoints.
In addition to the special silver conductor structure, the Singular speaker cable also has unique insulating layers. The copper conductor core is surrounded by special tubular-braiding pure silver fibers, on which a thin layer of high-purity Teflon insulation has been applied. Conductors with high-purity Teflon insulation “float” in a special insulating oil, surrounded by a polymerized siloxane insulating layer. The special insulating oil further reduces the negative effect of the insulation and also has a vibration-dampening effect along the entire length of the cable. The polymerized siloxane layer and the external antistatic mesh protect against negative effects from the outside.
The newly developed antistatic-mesh outer layer not only gives the Singular speaker cables a special and unique appearance but also keeps static fields from the environment away from the conductors.
The Singular speaker cables has full separate Balanced four quad-core structure conductors providing which provide a constant balanced and accurate signal to the loudspeakers. The advantage of the Balanced four quad-core design is the full symmetry, as all wires have the same cross-section and same electrical parameters, providing balanced, continuous, and stable performance as opposed to asymmetric conductors. The asymmetric conductors, such as those with double-phase conductors, can cause continuous fluctuations in signal due to different cross-sections and electrical parameters. Even the slightest fluctuations in the audio signal can affect the stable operation of audio devices, loudspeakers as it can cause continuous noises in the sound.
In addition to the advantages of the completely symmetrical design, the Balanced four-core vortex structure effectively reduces the skin effect, since the conductors are not only composed of elementary fibers but are arranged in separate groups. The cross-section of the wires is small enough to prevent skin-effect formation, but overall the conductors have a suitable cross-section to ensure optimal signal transmission. The Singular speaker cable is available in single-wired and bi-wired designs. The bi-wired design has completely separated signal paths for low and medium/high-frequency signals for more accurate and natural sound reproduction since the higher current of low-frequency signals cannot modulate the medium/high-frequency signals. high frequencies.
Connectors
The Singular speaker cable is made from a single block of high-quality, selected pure silver plated high-purity copper connectors. The pure silver coating on the outside of the contacts provides a proper connection that has measurably better electrical parameters and clearer signal transmission than the gold coating. The Singular speaker cable is also available with high-quality pure silver-copper banana plugs or pure silver-copper spades.
Made by hand
Each Singular speaker cable is assembled entirely by hand, from the design of the vortex structure to the solder-free installation of the connectors. Each Singular speaker cable is made with high precision and attention to detail, so it takes approximately 70 hours to complete a 7-foot-long Singular speaker cable, including the final tests.
Singular speaker cable are placed in a special premium anti-static bag after the last quality control.
Technical characteristics: Resistance: 0.0001 Ω/ft, Capacitance: 0 pF/ft (cannot be measured), Inductance: 0 μH/ft (cannot be measured)
Singular speaker cables are available banana plug or spade.
Available lengths: 2×7 ft/2x210cm, 2x9ft/2x270cm, 2x12ft/2x360cm and custom sizes.
Specifications
- Design: High Definition full-symmetrical Balanced Network Technology
- Color: Invisible white
- Conductors: Pure silver, High-purity copper core
- Total conductive cross-section: 6 AWG – 12 mm2
- Discrete solid conductors: 304 – full separate Balanced quad-core helix structure and 4D braided
- Insulation: PTFE, Polymerized siloxane, insulation oil, antistatic polymer mesh,
- Connectors material: Pure silver plated high-purity copper
- Cable design: single-wired or bi-wired
- Connector types: banana plug or spade
- Cable length 2x: 7Ft / 210cm, 9ft / 270cm, 12ft / 360cm and custom sizes
Price (incl. VAT):
Singular silver series balanced speaker cable (pair): 7ft/210cm sw-19.999 €, 9ft/270cm sw-23.999 €, 12ft/360cm sw-27.999 € / 7ft/210cm bw-21.999 €, 9ft/270cm bw-25.999 €, 12ft/360cm bw-29.999 €
NOTE: To get the best quality of Singular speaker cables, you need a “burn-in” period. After about 10-14 days of using Singular speaker cables, the sound quality becomes more life-like.